- Back to Home »
- Mixing of hot and cold water CFD
Posted by : Unknown
Thursday, 26 September 2013
MIXING OF HOT AND COLD WATER CFD
- CAD :
The geometry is a simple 2 inlet pipe with a mixing junction and an outlet. Cold Water enters from one end and combines with hot water coming from the second end at the junction both inlets are velocity inlets and the outlet is pressure outlet set to zero. (NOT A WALL) - MESHING :
Learned the importance of slicing up the geometry
Unsliced Geometry Mesh
Sliced up geometry mesh
- Running the solution :
1) check the mesh
2) Enable the energy equation and k-epsilon models
3) set the boundary conditions for the inlet and the outlet and also specify their temperatures
4)Intialise the solution and run the calclations - Results:
Cold velocity inlet= 0.05m/s hot velocity inlet= 0.05m/sCold water temperature = 300KHot water temperature = 400K